What Does Aperture Do? A Beginner’s Guide to Exposure and Background Blur

By Owen Ellis, CaptureView editorial pen name


A hand turning the aperture dial on a camera outdoors
The aperture setting controls how much light passes through the lens and affects depth of field.

Aperture is the opening inside a lens. It changes how much light reaches the camera sensor and how much of the scene appears in focus from front to back. Those two effects are linked, which is why aperture can feel confusing at first. A low f-number means a wide opening; a high f-number means a smaller opening.


You do not need to memorize every setting before making a photograph. Start by deciding whether you want more background blur or more of the scene to look sharp. Then choose an aperture that fits that goal, take a test photo, and check both the subject and the exposure.


What the f-number means


Aperture is written as an f-number, such as f/2, f/4, f/8, or f/16. The scale runs in an unintuitive direction: f/2 is wider than f/8. At f/2, the lens opening is relatively large and lets in more light. At f/16, the opening is smaller and lets in less.


Each full stop changes the amount of light by a factor of two. Moving from f/4 to f/5.6 halves the light. Moving from f/5.6 to f/8 halves it again. In the other direction, f/8 to f/5.6 doubles the light. Many cameras let you adjust aperture in smaller one-third-stop steps, so the numbers on the dial may not jump through the full-stop sequence.


Why a wide aperture blurs the background


A wide aperture can create a shallow depth of field: a narrower range in front of and behind the focus point appears acceptably sharp. That is useful for a portrait when you want attention on the eyes and less on a busy room. It does not automatically make the background disappear. The amount of blur also depends on how close you are to the subject, the distance between the subject and background, and the lens focal length.


For a simple test, place a person or object a few feet in front of a distant background. Take one photo at the widest aperture available, then make another at f/8 without moving the camera. Compare the background, but also inspect the focused detail. If the subject is not sharp, the focus point may have landed in the wrong place or the shallow focus area may be too small.


With a kit zoom, the widest available aperture often changes as you zoom. The camera may show a range such as f/3.5–5.6. That means the lens opens to f/3.5 at the wide end and only f/5.6 at the telephoto end. This is normal. You can still soften a background by increasing the distance between subject and background or by using the longer focal length from farther away.


Why a smaller aperture keeps more in focus


A smaller aperture, such as f/8 or f/11, generally increases depth of field. It can help when photographing a landscape, a group, or a tabletop scene where you want several important details to remain sharp. Focus still matters: a small aperture cannot make every distance perfectly sharp, and very small openings such as f/22 can reduce fine detail because of diffraction.


For a landscape, f/8 is a useful starting point on many lenses. Focus on a meaningful area within the scene rather than automatically focusing at the farthest mountain. If the foreground is close and must be sharp too, make a test image and zoom in to check it. A tripod can help when the smaller aperture requires a slower shutter speed.


Aperture changes exposure too


Exposure is controlled by aperture, shutter speed, and ISO. If you close the aperture by one stop, the image receives half as much light unless another setting compensates. In aperture priority mode, the camera usually adjusts shutter speed for you. In manual mode, you choose the other settings yourself. Auto ISO can also raise sensitivity when the light is low.


Watch the shutter speed when you select a small aperture indoors or at dusk. A value that is too slow can make a handheld photo blurry. If the camera drops below a comfortable speed, open the aperture, raise ISO, add light, or use support. The right choice depends on whether motion blur or noise would be more distracting in that particular picture.


Try aperture priority as a learning tool


Set the mode dial to A or Av, depending on the camera brand. Choose an aperture and let the camera select shutter speed. Keep ISO on Auto at first, with a reasonable upper limit if your camera allows it. This gives you room to explore depth of field without having to adjust every exposure control at once.


Make three frames of the same still subject at the widest aperture, f/5.6, and f/8. Keep your position and focus point fixed. Review the files at the same magnification. Note how the background changes and whether the shutter speed or ISO moved. If the camera used a shutter speed too slow for handheld work, repeat the test with more light or a tripod.


Common aperture mistakes


  • Choosing the lowest number every time: A very wide aperture can leave one eye sharp and the other soft in a close portrait. Try one stop smaller if you need more depth of field.
  • Expecting f/16 to fix missed focus: It increases the range that looks sharp, but you still need a sensible focus point and enough shutter speed.
  • Ignoring the lens limit: If the camera will not select f/1.8, the lens may not support it. Kit lenses and zoom lenses have different maximum apertures.
  • Changing several settings during a comparison: Keep framing, distance, focus, and light consistent so the aperture difference is easy to see.

Quick practice in a garden or room


Choose a textured object, such as a flower, mug, or small plant, and place it in front of a background with visible detail. Focus on the front edge. Photograph it at the widest aperture, then at f/5.6 and f/8. Move the object farther from the background and repeat the wide-aperture frame. You will see that subject-background distance can change blur just as clearly as the f-number.


Before each shot, check three things: the aperture on the display, the shutter speed, and the focus indicator. Afterward, look at the actual result rather than judging only from the rear screen at arm’s length. A computer or phone display makes it easier to inspect whether the important part is sharp.


Aperture is a creative control as well as an exposure setting. Use a wider opening when a soft background helps the subject stand out. Use a smaller opening when several parts of the scene matter. The numbers become easier to remember once you connect them to the photographs you want to make.


Practice takeaway: Photograph one still subject at three apertures without changing your position. Compare focus depth and note how the camera compensates with shutter speed or ISO.

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Continue learning

Browse Photography Tips →

Explore Camera & Lens Basics →

© 2026 CaptureView. All rights reserved.